JTFY Transformer Corrugated Fin wall Automatic Embossing Welding Machine

Embossing Welding machine is a special manufactured automatic machine,it is not a standard machine in the Auto Corrugated fin wall manufacturing line.

In some design, Corrugated Fin wall need make one or two stiffeners on the corrugated fin wall to give it more strength.

So, in transformer radiator manufacturing process, the one stiffener fin wall named ONE or SINGLE EMBOSSING CORRUGATED FIN WALL; two stiffer is DOUBLE EMBOSSING CORRUGATED FIN WALL.

Corrugated Fins Wall with single & double Embossing

The Embossing Welding Machine is used to weld stiffeners which on Corrugated fin wall middle.

Embossing welding

JTFY 1*50 Automatic Single Spot Welding Machine for Corrugated Fin Wall Transformer Tank

JTFY Automatic Single Spot Welding Machine, also named Single Embossing Welding machine.

Overview of One embossing) welding machine:

JTFY-1 X 50 automatic spot welding machine for transformer corrugated tank is a special equipment used for spot welding of reinforcing ribs of corrugated fin wall.

Single Embossing Welding Machine Main technical parameters:

Input power supply: three-phase AC380V + 10%

Frequency: 50Hz

Welder power capacity: 100KVA

Control box power supply capacity: three-phase 380V, 8KW

Welding rated primary current: 160A

Secondary no-load voltage: 7.2V

Load duration: 50%

Pressure of gas source system: greater than 0.4 Mpa

Cooling water flow and pressure: 30L/min 0.2Mpa

Maximum thickness of welded workpiece: 1.5 + 1.5mm

Welding workpiece height: 100mm-400mm

Welding workpiece length: 300mm-1300mm

Welding machine shape size: 4500x2400x2300mm

Composition of Single spot (Single embossing) welding machine:

This machine is composed of frame, beam column and XYZ three-axis motion control system. The X-axis is left and right motion of servo motor, the Z-axis is up and down motion of servo motor, which is digitally controlled by PLC. The Y-axis is a chain transmission for the workpiece of the lower bracket, and the power is a frequency conversion motor.

Automatic Single Spot (embossing) Welding Machine Manufacturing Cycle and Price:

1. Production cycle: 45 days.
2. Price: as per corrugated fin wall structure and requirements.

Double embossing corrugated fin wall be welded

JTFY-2 X 50 Special Automatic Double Spot (Embossing) Welding Machine for Corrugated Fin Wall Transformer Tank

Overview of Double Spot (Embossing) Welding Machine :

BWN-2 x 50 Automatic Double Spot (Double embossing) welding machine for transformer corrugated fin wall is a special equipment specially used for spot welding of reinforcing ribs of corrugated tank.

Main technical parameters of Double Spot (Embossing) Welding Machine.

Input power supply: three-phase AC380V + 10%

Frequency: 50Hz

Welder power capacity: 100KVA

Control box power supply capacity: three-phase 380V, 8KW

Welding rated primary current: 160A

Secondary no-load voltage: 7.2V

Load duration: 50%

Pressure of gas source system: greater than 0.4 Mpa

Cooling water flow and pressure: 30L/min 0.2Mpa

Maximum thickness of welded workpiece: 1.5 + 1.5mm

Welding workpiece height: 100mm-400mm

Welding workpiece length: 300mm-1300mm

Welding machine shape size: 4500x2400x2300mm

Composition of Double Spot (Embossing) welding machine:

The machine is composed of frame, beam column and XYZ three-axis motion control system. The X-axis is divided into about XA and XB axes for servo motor, and Z-axis is divided into about ZA and ZB axes for servo motor. The machine is digitally controlled by PLC. The Y-axis is a chain drive for the workpiece of undercarriage and the power is a variable frequency motor.

Automatic Double Spot (Embossing) welding machine Manufacturing Cycle and Price

1. Production cycle: 45 days.
2. Price: as per corrugated fin wall structure and requirements.

More information about our Transformer Corrugated Fins Wall Folding & Welding Manufacturing, please feel free to contact with us :+008615195010186 cnkylt@aliyun.com

Related Products of Transformer Tank Machinery :

1.JTFY Full Automatic Corrugated Fins Wall Pressing and Welding Manufacturing line.

2.Full-automatic PLC Transformer Tank Corrugated Fins Froming/Pressing/Folding Machine

3.Full-auto PLC Transformer Tank Corrugated Fins Seam Welding Machine

4.Hydraulic Decoiler

5.Corrugated Fins Leakage Testing Machine

CONTACT WITH US:+008615195010186 cnkylt@aliyun.com